Check out the Working Z-scale 3D-printed Railroad Crossing.

The project is still under development.

The page: Railroad Crossing Gate

Check out the progress on the layout:

2 trains with 4 and 2 engines running on High Line on Zity Edge. Still a lot to do on the buildings and the environment, but the trains are running.

Check out the short testvideo #4 from Zity Edge Layout.

Finally, I have installed all tracks and the High Line bridge, so I could do a complete testrun.

I took the layout out of the closet and moved it on the table in the livingroom, so I could install and clean all tracks.

Check out the short testvideo #3 from Zity Edge Layout.

A test with an animation of the LED-strips behind the mountain backdrop. The current colors in the video are just to test to see how it could be. All lights are run by an Arduino microcontroller. I guess I need to use some time to develop the programs for the Arduino. The LED-strip in the video is a 144 RGB leds/meter, adressable WS2812B strip, with a total of 235 LED's.

Check out the first testrun on the Zity Edge Layout. The Low Level track is ready for action.

A few days ago I put this first test run from the layout on youtube:

Check out the video showing the first testrun on the Mainline. Not all track and turnouts are installed yet, but one of the mainline track is completed, ready to run.

Check out my first run on the new layout. The lower track is installed, and I needed to check if the big AZL steamers would run on the track. Minimum radius on this part is 195 mm. 

The lower level of the module is now finished and all the track have been installed.

The first ever run on this new module was done tonight. Not a complete round because the tracks in the yard are not connected to power yet, but the front part has been tested.

All visible parts have got MTL track, hidden part have got some Märklin track and some Peco flextrack. I could have used MTL all over, but I have plenty of the other track and try to use Märklin and Peco in hidden areas.

Check out video: